{"product_id":"newmar-12-12-3i-power-stabilizer-12-12-3i","title":"Newmar 12-12-3i Power Stabilizer [12-12-3I]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-12-3i Power Stabilizer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed sensitive electronics with proper voltage, regardless of the battery condition. This stabilizing converter provides continuous, precisely regulated output over the entire range of a battery’s usable voltage. This prevents subjecting loads to fluctuating input voltage, which can cause shutdown, diminish performance, and possibly damage sensitive circuitry.\u003c\/p\u003e\u003cp\u003eThis converter provides total input\/output isolation, virtually eliminating conducted line noise and permitting the connection of negative ground gear to positive or floating ground systems, or vice versa. It can be modified for use as a battery charger, allowing them to maintain a battery at a great distance from the primary voltage source, providing reserve power if the main source fails. The rugged anodized aluminum case is ideal for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplication Benefits Include:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperate electronics at optimal input voltage, even from nearly drained batteries\u003c\/li\u003e\n\u003cli\u003eBoost voltage to compensate for voltage drops in long wire runs from batteries\u003c\/li\u003e\n\u003cli\u003eEliminate voltage drops during momentary high current drain from batteries, as during engine start\u003c\/li\u003e\n\u003cli\u003eEliminate voltage fluctuation from charge sources\u003c\/li\u003e\n\u003cli\u003eEliminate voltage overshoot due to sudden removal of high current load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 10-16\u003c\/li\u003e\n\u003cli\u003eInput Amps: 4\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 3\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 3\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 1 lb. (.45 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 12 or 24V, nominal, see matrix\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. Current limit is set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light )\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz.\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation – Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions\/Factory Modifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger (contact factory)\u003c\/li\u003e\n\u003cli\u003eParallel\/redundant operation (contact factory)\u003c\/li\u003e\n\u003cli\u003eHigh-vibration mounting kit\u003c\/li\u003e\n\u003cli\u003eNon-standard output voltage (contact factory)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.\u003c\/p\u003e\u003cp\u003eThe kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a “super shock absorber” for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT–L for units that weigh 2–15 lbs. and Kit–H for units that weigh 16-70 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:mm5nlpds ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":40470803906662,"sku":"CW-102294","price":222.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0148\/6399\/0848\/files\/102294XL_63541b82-cbfc-4795-a825-842cc8c97535.jpg?v=1742463240","url":"https:\/\/boatersemporium.com\/products\/newmar-12-12-3i-power-stabilizer-12-12-3i","provider":"Boaters Emporium","version":"1.0","type":"link"}